Installation of acoustic panels
Woodonwall's acoustic panels are easy to mount on both walls and ceilings.
SE - Read more about installing design panels
VIDEO - ASSEMBLY INSTRUCTIONS
Installation Sound absorption class D
To achieve absorption class D, the acoustic panel is mounted directly on the wall or ceiling by using suitable screws for the substrate in the correct color against the acoustic felt for hidden attachment.
WE RECOMMEND
__________________________
2400 mm panels are mounted with
– 15 mounting screws for wall
– 30 mounting screws for ceiling
2700 - 3000 mm panels are mounted with
– 18 mounting screws for wall
– 36 mounting screws for ceiling
__________________________
FOR INSTALLATION YOU WILL NEED
– Circular saw
– Spirit level
– Screwdriver
– Carpet knife
– Tape measure
– Screws
– Jigsaw (only for electrical outlets)
– Hacksaw (only for LED strips)
– Hole saw (only for electrical outlets)
Installation Sound absorption class A
To achieve absorption class A (best absorption class) mount the acoustic panel on studs 45 mm thick with 45 mm thick insulation behind the panels. The studs are mounted with 600 mm cc distance on the wall and 300 mm cc distance on the ceiling.
WE RECOMMEND
__________________________
2400 mm panels are mounted with
– 15 mounting screws for wall
– 30 mounting screws for ceiling
2700 - 3000 mm panels are mounted with
– 18 mounting screws for wall
– 36 mounting screws for ceiling
__________________________
FOR INSTALLATION YOU WILL NEED
– Circular saw
– Spirit level
– Screwdriver
– Carpet knife
– Tape measure
– Screws
– Jigsaw (only for electrical outlets)
– Hacksaw (only for LED strips)
– Hole saw (only for electrical outlets)
Wall installation Glue
It is also possible to glue the acoustic panel directly to the wall with a fast-drying mounting adhesive. We recommend that the adhesive be applied in a thick string as shown in the illustration on the left.
__________________________
FOR INSTALLATION YOU NEED
– Circular saw
– Spirit level
– Carpet knife
– Tape measure
– Screws
– Jigsaw (only for electrical outlets)
– Hacksaw (only for LED strips)
– Hole saw (only for electrical outlets)
The easiest way to do this is with a fine-toothed saw. The underlying acoustic felt is most easily cut with a carpet knife. If you want to have your acoustic panels cut by us to a different size, there will be an additional cost of € 19/cut.
