LED profile Slim for acoustic panels

Dimmable LED profile (LED strip COB 8W/m IP20 3000K 800lm RA90 24V)

They are specially manufactured to fit between the ribs. Includes a 3-meter cable.

NOTE! The customer is responsible for the purchase of the transformer and control. The profile should be glued in place for the best results.

Guide for installing LED strips (Swedish) View mounting guide.

Guide for steering LED strips (Swedish) https://www.xcen.se/guide-styrning-ledlister-till-wood-on-wall

Some assembly tips:

1. Aluminium profiles can be cut to the desired length with a standard hacksaw.
2. The guide tape can be cut with scissors to the desired length by markings every 5 cm.
3. If the cable should exit on the backside, then drill holes for the cable at the end piece of the back of the aluminium profile and lead the cable to the back.
4. If the cable should exit through the short side of the profile, make a hole in the end piece with a drill and lead the cable through the end piece.
5. When installing LED tape, make sure that the tape adheres properly. Feel free to use extra glue dots to make the tape stick properly to the end pieces, especially by the cable since the cable could push up the LED tape during installation.